What is not included iPhone 6
Unfortunately, even with such high-tech and reliable device, such as iPhone 6 Plus can happen unpleasant situation.
Violation of conditions, an accident, and sometimes manufacturing defects can cause the release of the smartphone down. A common problem is the situation when the device is not responding on pressing Power key.
Sooner or later, but with this issue faced by most users of iPhones. The problem with the inability on the iPhone , pretty common. Every generation of iPhones the features of the problem. The first thing to do is to connect your iPhone 6 to the original charge.
Most often, the culprit of failure is the «Power» button, which turns out to be a damaged contact pad or a trace. The reason most often lies in the ingress of moisture into the body or mechanical damage to the parts caused by the fall of the phone. Often refusing to engage due to a serious failure in the software or damage to the controller of the power system.
Why and how to solve
The reasons for which iPhone 6 turned off and will not turn on very much.
Enlarged they can be divided into the following:
- total discharge of the apparatus;
- software problems;
- hardware problems.
Software problems easier to solve, in a situation with hardware problems, the solution is more complex and costly.
Video: Replacing the bottom Flex cable
The program crashes
The most frequent reason does not start, or the program crashes. To resolve a software failure, you must do a hard reboot of the device. To do this, simultaneously press and hold for 15 seconds the power key and the Home key. As a result, the device will perform a reboot and be available to work normally.
If this does not help, you should try to put the device into recovery mode. To do this hold «Power» and «Home» for 30 seconds.
In a situation when such a basic decision problem together with a thorough charging the battery did not solve the problem, possibly the cause of the faulty device following:
- faulty battery gadget (necessary to replace on new);
- damaged adapter or USB cable (need a replacement adapter or USB-cable);
- dirty Jack connection cable (necessary to carry out the cleaning of the cord plugs in);
- poor quality (cheap) cable (replace with original);
- mechanical damage to the connector and other mechanical damage, such as falling, contact with moisture, after charging in the car, etc. (you must contact the service center);
- marriage (you must contact the place of purchase).
Also it is possible that the IPhone may not turn on after firmware update.
There are three different versions of events, depending on when you had a failure during firmware update:
- to reflash the phone again;
- replace the faulty NAND Flash. This memory chip containing all personal data of the owner;
- replacement of Nor Flash. This memory chip GSM module. It contains all the options for mobile operators. Without these parameters, the device will not be able to call.
The problem with the power and charging
If I cannot turn on the iPhone 6, then, most likely, the problem in diet or exercise. First and foremost, you should try to charge it. Moreover, to connect it to the charger should be at least 20 minutes from AC and 30 mins from the workstation.
Next, you need to try to run the IPhone without disconnecting from charging. If all goes well, then the display will show the symbol of lightning inside a discharged battery.
When the battery of the smartphone from Apple is discharged to zero after a short charging when you press the power button the display shows the image, which depicts a socket with a lightning symbol.
The solution to this situation is a longer charging the device. The charging time should be not less than 3 hours.
There are situations when a connector through which the phone charges, fails when using a different charging.
It is very important to know how trouble-free can charge iPhone 6 in the car, and more importantly to follow these basic rules. This leads to serious consequences. In the best case, the necessary battery replacement in the iPhone. At worst, it’s a controller replacement power supply or repair of defective power supply circuit.
iPhone 6 could
In addition to problems with the battery, not the inclusion of the iPhone can be attributed to the human factor. This is especially common when the phone is worn in the Trouser pocket.
The connector is clogged with dust and dirt, and the next time you try to charge it the iPhone just snaps. This problem is not very serious, as any service center within a few minutes be able to eliminate it for small money.
Pour the liquid
Moisture to your phone, or even flushing the fluid is a frequent phenomenon. The problem with the IPhone can begin not only at drowning him in the pond, but even when getting hit by rain. In this situation, the gadget may begin to fail.
Highly desirable in this case, the cleaning device or component repair of motherboard. It is important to stop using the phone immediately when moisture inside the device.
The problem is not quite trivial, so it is recommended to seek assistance from an authorized service center and avoid the problems that may arise in the future.
Miss on the floor
The problem with the inclusion of the IPhone may be due to mechanical damage, namely to fall to the floor. It is important to remember, was the fall of some time ago, as a feature of this situation is that the problem with a smartphone can begin to show after quite a long time after the fall.
Perfect appearance (no scratches or other visible flaws) does not mean that there are no problems with it.
Alternatively it may otsekohene one of several configurations:
- the power Flex cable;
- the loop display;
- train battery.
A more difficult situation caused by poor soldering on the motherboard or damage one or more chips.
IPhone users can face a situation when the unit is off and is not included. If you do not consider the simplest options when simply was not time charged battery, then most likely, it’s the fault of the boot block data to the operating system of the gadget.
This problem can be solved if you try to restore the partition, connecting the smartphone mode DFU.
Often to bring the apparatus from this position to help his hard restart, and when ingestion it of moisture or mechanical damage it is better to turn to professionals.