step-by-Step setup router Zyxel Keenetic Start

By | 10.12.2018



Step-by-step setup router Zyxel Keenetic Start

Zyxel Keenetic Start is llight model Zyxel Keenetic. However, Keenetic Start perfectly solve the task of connecting electronic devices to the Internet. The router will allow you to combine home computers and all sorts of gadgets to the network and provide simultaneous Internet access with multiple devices via Wi — Fi.

For guest devices have the option of assigning a separate Wi-Fi network with Internet access, but with the restriction of access to personal data. A regular firewall is responsible for information security on the home network.

Пошаговая настройка роутера Zyxel Keenetic Start

Package router and

Equipment noterminal: no network cable, documentation and power supply. All inscriptions on the device is in Russian. In the presence of the mounting device on the wall. At a convenient location is key activate WPS function, allowing you to simply and immediately be connected to the router Wi-Fi device without using the encryption key.

Пошаговая настройка роутера Zyxel Keenetic Start

In appearance considering the router is very similar to the older brother (Keenetic 4GII). It only differs in the absence of USB ports and having only one antenna 2dBi.

Пошаговая настройка роутера Zyxel Keenetic Start

The device is quite compact (140х110х30 mm). It weighs only 180 grams.

On the upper side caused trademark of the manufacturer, the WPS button to enable the auto Wi-Fi protected connection and led power indicators enable the wireless Wi-Fi module, connected to the Internet and connect to the lan ports.

All ports and connectors are located on the back of the router.

Пошаговая настройка роутера Zyxel Keenetic Start

Connection and preparation to work

Connection router Zyxel Keenetic Start can seem daunting at first glance.

Consider the process of connection details:

  • remove the wireless router out of the box, screw the antenna and place in the expected place;
  • plug the power cord into the appropriate connector on the back of the device, and the other end into the power outlet;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • network cable Internet provider, insert it into the port labeled «WAN»;
  • network cable (from standard), you need one end to insert into any LAN port and the other into the network card of the system unit.

After connecting the router it is important you must configure a router Zyxel Keenetic Start. To set it up initially, you need to log in to the interface of the router.

Input into the settings

For the configuration and maintenance of router no need of specialized programs. All management of the router is performed through a web browser.

To enter the interface of the router, you must do the following:

  • start proinstallirovan operating system web Obozrevatel;
  • in address bar enter ip address of device by default (192.168.1.1);
  • confirm by pressing «Enter»;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • when prompted, login and password should drive the required data. Usually the username is «admin» and password is «1234».
  • to complete the login procedure to the device interface by clicking «OK».

In the Zyxel router to the primary Internet settings there is a «Quick setup».

Пошаговая настройка роутера Zyxel Keenetic Start

Connect to the Internet

The router supports several connection options to the Internet, which is due primarily to choice of provider.

PPPoE for the House.ru, TTK and Rostelecom

The sequence of steps to configure the router from Zyxel for data providers (Rostelecom, TTK and House.ru) with the following:

  • go to «online List»;
  • to activate the «Broadband connection»;
  • to set the WAN port for external connection (note the need to «Use socket»);
  • tick off two further lines;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • in «IP settings» select the type «No IP address»;
  • in the string «MAC address» choose «Default» and click «Apply»;
  • open the section «Authorization»;
  • click the button to add a new connection;
  • in the active window to select the item ‘Activate’, Protocol type select «PPPoE» in the next field should be selected a pre-configured WAN connection, the server address must be filled. Username and password need to fill out (taken from the document provider). In the «Algorithm authentication» to tick PAP, CHAP. Click «Apply».

Connection to Internet will be created.

Dynamic IP

To configure connection to the Internet with dynamic address should:

  • go to the tab «Internet List»;
  • click on the line labeled «Broadband connection»;
  • in «IP settings» select «Automatic»;
  • in the line «MTU Size» to set the value to 1400 and click «Apply»;
  • open the section «Authorization»;
  • click the button to add a new connection;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • to highlight ‘Activate’, Protocol type select «PPTP» in the next field should be selected a pre-configured WAN connection, the server address must be filled. Login and password is required to enter from the contract with the operator. In the «Algorithm authentication» set to «Auto». Other parameters may be left blank. Click «Apply».

Connection to access Internet with dynamic IP address is ready.

Video: Review Zyxel Keenetic Start

How to configure a router Zyxel Keenetic Start to Beeline

The sequence of actions for configuring the router to consider the following Beeline:

  • go to the tab «Internet List»;
  • click on the line «Broadband connection»;
  • to configure the WAN port for external connection by placing a tick in the «Use socket»;
  • in a situation when the user has an active IPTV service from Beeline, you should put a tick beside the port that is connected to the console;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • check the following two points;
  • in «IP settings» select the type «automatic» and click «Apply»;
  • open the section «Authorization»;
  • click the button to add a new connection;
  • in the new window select «Use», the Protocol type select «L2TP» in the next field should be selected the previously configured port, the server address should be tp.internet.beeline.ru. The user name and password should be entered from documentation provided by the operator. In the «Algorithm authentication» to tick PAP, CHAP, MSCHAP. Click «Apply».

The result of the above actions will create a new connection to the Beeline.

LAN

To set the local network to consider wi-fi a router should:

  • go to «Home network»;
  • in the first tab enter the data for the network address and subnet mask. Confirm the selection by pressing the button «Apply»;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • to edit the fields in the second tab, with all the necessary information you can borrow tab of the DHCP server. In a situation when it is needed, you need to put a tick in the appropriate box and type the desired options and click on the «Apply»button.

WiFi

The sequence of steps to configure Wi Fi connection on the device «Zyxel Keenetic Start»:

  • go to «Wi-Fi»;
  • in the first tab to the second line «access Point» and select «Apply»;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • in the second tab should make the necessary information, namely the name of the network level and security key. You then confirm your selection by pressing the button «Apply».

IPTV

IPTV is a special technology that transfers information in the network, uses a dedicated IP Protocol. Due to this implements the broadcasting channels by using multicast. For IPTV only need to install the latest version of the device firmware, and the app will automatically make the correct settings.

Пошаговая настройка роутера Zyxel Keenetic Start

In the router for the configuration of IPTV meets the «Applications» tab, which should drive the required parameters and save.

Reset the router

To reset the router, you must perform the following steps:

  • to wait for a full load device;
  • press and hold the RESET button on the router, as long as the power indicator will not flash. Usually the button should be hold for about 10 seconds;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • release the «RESET»button.

After that the power led of the router flashes and then the router settings are reset to factory (default settings).

Updated the firmware

Quite often there are cases when it is vital to upgrade the firmware of the device. Despite the fact that this is a very responsible action, if you follow certain guidelines – it is not difficult to install a new version of the software.

The software update in question is recommended, by connecting to the router using an Ethernet cable. To update the firmware you need to use the standard function to update components. It is important that when you perform the upgrade had a stable connection to the Internet.

To update the firmware on the Zyxel router should:

  • download the latest firmware version;
  • to connect to the WEB Configurator of the device;
  • log into «the System. Configuration. Firmware»;

    Пошаговая настройка роутера Zyxel Keenetic Start

  • in the opened window, select the firmware file (it must first extract from archive) and click «Replace»;
  • after downloading new firmware and rebooting the router should check the latest version of the device in the relevant section in the version field «NDMS».

No wonder Zyxel Keenetic Start, positions itself as the Internet center of the starting level. Setting it up is fairly trivial, and the possibilities make it easier to create a compact network. This is the perfect choice for home and small office.




Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *