Repair keyboard after spilling liquid

By | 10.12.2018



Repair keyboard after spilling liquid

I method:

1. To turn off the computer and disconnect the keyboard.

2. Rotate the keyboard (keys down) and shake.

3. Put a cloth and put the keyboard upside down till all the liquid will not flow out.

4. Leave in this position the keyboard at night.

II method:

1. To turn off the computer and disconnect the keyboard.

2. To turn the keyboard and Unscrew all the screws.

3. Raise the rear cover and put aside.

4. Remove the foil keyboard and wipe with a dry cloth.

5. Wipe the liquid with buttons and with keyboard case with a slightly dampened cloth.

6. Using a hair dryer or vacuum on blow to dry the film and all the other details the keyboard.

7. When everything has dried, assemble the keyboard.

8. To connect the keyboard and turn the computer on.

Note:

All these described methods should be done immediately after a spill of liquid. Because the tracks on the tape can be oxidized and this will lead to their breakage.




Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *