manual for configuring a router of Zyxel Keenetic Omni

By | 10.12.2018



Instructions for configuring a router of Zyxel Keenetic Omni

Modern network devices, such as Zyxel Omni Keeneic, allow you to configure the network and connect to the Internet for a short period of time. In this case the main thing — to follow all the instructions, and then the network will not cause irritation.

Sign in to the web interface

To configure a router ZYXEL KEENETIC OMNI, you need to visit the homepage of the network device. It is necessary to create a local network and its direct connection to the Internet.

The user must open any Internet browser and type in address bar 192.168.1.1. Then on the screen appears the web interface admin page in which to enter will need to enter the name and code.

In the «user name» typed «admin» and «password» is «1234». If you can not enter, you will need to perform a factory reset by pressing the button on the rear panel of the router.

After that, the page will refresh and you will see a sections with all sorts of settings where you can change the passkey on the homepage of the router.

Password

When you log on your ip address to the page the network administrator, the manufacturer and experienced users recommend that all established to change the default password to prevent unauthorized access or third-party use of the Internet.

To do this:

  1. open the tab «system», «users»;
  2. select «password»;
  3. in the line «new password» to indicate the updated code;
  4. to duplicate the new password and click on the option «apply» or «save».

    Инструкция по настройке роутера Zyxel Keenetic Omni

The system saves the new data and, thus, to change the login settings on the admin page.

Updated the firmware

Firmware update v1-version is not the most complicated procedure of all that is held during the configuration of the network of the distributing device.

The user actions should be the following:

  1. connect the ethernet cable to the router;
  2. go to «system»;
  3. in the updated window select the tab «configuration»;
  4. click on the line «firmware»;
  5. in the new window click on the option «select file»;
  6. in the opened next window specify the path to the file with the latest firmware (firmware is downloaded from the official website of the manufacturer in the form of a zip archive and unzipped a file with the format «bin»).

    Инструкция по настройке роутера Zyxel Keenetic Omni

In addition, the user should know what an alternative firmware may not be applicable due to the possible disruption of the router in the future.

Инструкция по настройке роутера Zyxel Keenetic Omni

Internet Setup

Configuring access to the Internet begins with the fact that you want to review all data on the technology of the Internet connection.

This information is specified in the contract of rendering of services of Internet access and in the instructions to the router on the bottom of the device:

  1. technology connection (PPTP/VPN, PPPOe, L2TP);

    Инструкция по настройке роутера Zyxel Keenetic Omni

  2. username and password for the Internet connection;

    Инструкция по настройке роутера Zyxel Keenetic Omni

  3. username and password for the local network.

Then you need to go to the admin page of the router, select the tab «Internet». And then, depending on the connection technology, click on the parameters tab of the corresponding connection.

And start entering settings for each of the relevant options:

  • Protocol (connection type);
  • connection method (direct or access point);
  • server address;

    Инструкция по настройке роутера Zyxel Keenetic Omni

  • the username and password to connect to the Internet.
  • configure the ip and dns addresses.

    Инструкция по настройке роутера Zyxel Keenetic Omni

Thus, there is the creation of an Internet connection.

L2TP connection (Beeline)

To configure ZYXEL KEENETIC OMNI Beeline recommends taking into account of some features of the connection technology. This provider renders services to provide access to the Internet Protocol «L2TP», which is different from PPPOe.

The connection is as follows:

  • login to the home page of the router, enter username and password;
  • click on the tab «Internet» and in the opened window click on the option «Authorization»;
  • fill in the access parameters:
  1. access Protocol (L2TP);
  2. description (connection name);
  3. server address (specified in the contract);

    Инструкция по настройке роутера Zyxel Keenetic Omni

  4. the user name and password (the keys of access to the Internet, specified in the agreement);
  5. authentication (auto);
  • save the settings, click «apply».

Then in the bottom right corner of your desktop should appear on the label in the form of a computer monitor or ladders without exclamation points, that would mean about the successful connection.

Video: Overview, setting up Internet and Wi-Fi on the router

PPTP (VPN) connection

The PPTP connection means that the Internet access will be special remote way by creating side-encrypted connection. In this case, you need to understand that the common router settings here will not work.

You will need to create an additional connection:

  • go to the home page of the router and enter the username and password to gain access to the options page network settings;
  • select the tab «authorization»;
  • in the window that appears, set the connection parameters:
  1. Protocol (PPTP);

    Инструкция по настройке роутера Zyxel Keenetic Omni

  2. to connect via (Broadband connection);
  3. server address (specified in the contract);
  4. the user name and password;
  5. the authentication method (Auto);
  • to save the entered settings by clicking on the option «apply».

Thus, it is possible to use any Internet resource without fear for stealing private data from the computer.

PPPoE for Rostelecom

Rostelecom — a company that uses the most popular and reliable connection technology «PPPOe». This type of connection is easy to setup and use, as well as time-tested.

To connect your router to Zyxel Keenetic Omni from the ISP, you must:

  • go to home page of router by typing username and password;
  • on the updated page, click on the tab «Internet»;
  • in the new window, select «authorization»;
  • in the updated window, select the following options:
  1. a Protocol type (PPPOe);

    Инструкция по настройке роутера Zyxel Keenetic Omni

  2. the user name and password (details are in the contract with the provider);
  3. configure IP settings (automatic);
  4. the authentication method (Auto);
  • save the settings by clicking on the option «apply».

After that, the device will automatically take the rest of the data to connect to the Internet and automatically adds the required data from the network to display the connection.

Setting port forwarding (NAT)

Port forwarding — this is an important procedure related with setting up Internet connection through the router attached to the remote computer.

Инструкция по настройке роутера Zyxel Keenetic Omni

NAT connection used in cases when you need to configure the Internet via the remote computer and the router.

In this case, the user should proceed as follows:

  1. go to home page of router by typing username and password;

    Инструкция по настройке роутера Zyxel Keenetic Omni

  2. open the tab «system monitor» and select «home network»;
  3. in the updated window, under «list of connected devices» select «to Fix the IP address for device»;
  4. in the opened new window «Check devices» to put a check mark in the «permanent ip address» and click on the option «register»;

    Инструкция по настройке роутера Zyxel Keenetic Omni

  5. to return to the home page and select the «Security»tab;
  6. click on the option «stream to network recipients NAT»;

    Инструкция по настройке роутера Zyxel Keenetic Omni

  7. click on the option «Add rule» and fill the fields:
  • interface (Broadband ISP connection);
  • Protocol (TCP/21 – file transfer FTP where 21 is the port number);
  • TCP/UDP ports (single port, 21);
  • to redirect to the address (192.168.1.33);
  • click on «save».

The port number can be read from the tab «Home network», where specified this information.

Wi-Fi setup for Zyxel Keenetic Omni

A wireless connection allows you to work with your computer without the use of all kinds of cables and wires.

To create such a network in the wi-fi module, it is required to carry out a number of actions:

  • go to home page of router by typing username and password;
  • click on «wi-fi»;
  • in the opened window, enter the following settings:
  1. network name/SSID (enter arbitrary network name);

    Инструкция по настройке роутера Zyxel Keenetic Omni

  2. network security (WPA2-PSK);
  3. the network key (password to enter is arbitrary);
  4. channel (auto);
  5. standard (802.11 b g n);

    Инструкция по настройке роутера Zyxel Keenetic Omni

  • click «apply» and save the username and password set up a wireless network in print and electronic media.

After you create the wireless connection, the Internet connection will pass through this home network.

IP-TV

When setting up functions for IPTV Zyxel Keenetic Omni for watching digital TV is required to carry out the firmware update info for the latest version, because otherwise possible malfunction of the device.

In addition, you must change several settings to make full use of the TV and act as follows:

  • go to home page of router;
  • log to the tab «Internet» and select «Connect»;

    Инструкция по настройке роутера Zyxel Keenetic Omni

  • click the line «broadband connection»;
  • in the opened window select the port number which will be connected to the console by putting a tick next;
  • click «apply» and return to the start page of the router;
  • select the tab «home network»;
  • in the renewed window click on the tab «IGMP Proxy»;

    Инструкция по настройке роутера Zyxel Keenetic Omni

  • put a checkmark in «enable «IGMP Proxy»;
  • in the line «ISP», select «provider» and the line «Home» — «home network».

The network device will automatically take the data from the network and finally complete the debugging connection to a digital TV.

Save/restore settings

Save settings after each change. This will require after the adjustment of groups of parameters in one of the tabs of the web interface to click on the option «apply».

And to restore settings, ie bring to the factory settings, simply click on the «reset» button, which is located on the bottom of the router.

Printer settings

In addition to computer router Zyxel Keenetic Omni is able to support the work of the printer.

This requires support for the network connection. That is, the socket for the network cable that is connected to a PC or router.

To connect the printer to the network requires:

  • go to home page of router;
  • open the tab «monitor»;
  • in the line «usb device» to check for the string «printer».

    Инструкция по настройке роутера Zyxel Keenetic Omni

If the line printer does not appear, then you must update the firmware of the router.

But if the device is not recognized by the router and after a firmware update, then the operation of the printer with the network device temporarily impossible.

Until then, until the driver version of router that will support printing equipment.

Changing button functions

Changing button functions is an innovation in the field of network technology. It is used in order to make the router more convenient for a specific user.

To implement such replacement, there is a button «FN» key, located next to the reset button.

Инструкция по настройке роутера Zyxel Keenetic Omni

The rest can be done in the web interface without any help:

  • go to the home page of the router and select the tab «system»;
  • in the updated window, choose «button»;
  • select the button and specify its new function;
  • click on the option «apply».

Thus, the FN key is to be programmed for a new function.

Setup router Zyxel Keenetic Omni is not so difficult, as it seems at first glance. You can work online remotely configure the printer, or even digital TV.

Simple and intuitive web interface will help the novice user on their own without the help of a professional to connect to the Internet. The main thing — to strictly follow the instructions.




Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *