manual for configuring a router of Zyxel Keenetic Omni 2

By | 10.12.2018



Instructions for configuring a router of Zyxel Keenetic Omni 2

Router Keenetic version of the Omni II is an Internet center and is used to gain access from your home computer to the worldwide web and watching TV via Ethernet cable. The manufacturer guarantees a data rate up to 300 Mbps.

Simultaneous Internet access and local services provider implemented on the technology Link Duo and TV Port. The device supports popular USB modems for 3G/4G, DSL, and also works as a Wi-Fi hotspot access.

Connection and preparation to work

Before performing this item, you should read the manual, study the design of the router, to determine how to connect.

Package includes:

  • the device with antennas.
  • connecting cable;
  • power supply;
  • manual;
  • warranty.

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

Initially the device is connected by wire to the computer through the power supply to 220 V. the Network connector of computer is connected by cable with the LAN connector and input cable service provider connects to the WAN connector.

When enabled, the LEDs are illuminated «Power», «Activity», the number of the connected LAN port. Before you go into the interface settings of the router need to know the username and password the factory settings that are on the lower cover.

Control settings of the network card:

  • using «start menu» go to «control Panel».
  • find the item «Network and Internet».
  • walk through the items «control Center network and sharing, Change adapter settings».
  • to find the «local area Connection».
  • click the right mouse button on «Properties».
  • set «Internet Protocol version 4 (TCP/IP/v4)».

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

To connect modes automatically obtain IP address and DNS server and click OK.

Input into the router?

In the address bar of the browser it is set: 192.168.1.1. Here at once there is a query window, set the new password of the administrator. Enter the name and code of the administrator that are available on the label of the back cover. Confirm your entry with «OK». At this stage, it is not recommended to change the data installed by the manufacturer.

Инструкция по настройке роутера Zyxel Keenetic Omni 2

Internet Configuration

There are two options:

  • fast;
  • using the web Configurator.

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

Quick

In this case, you must make a selection and go to «Internet Connection».

Section allows:

  • to set your own MAC address;
  • to change it to was informed;
  • not to bind provider.

Major providers use the latest version of the bindings, therefore it is recommended to select this mode. Own MAC address printed on a sticker barcode. Registered address turns out from the contract with the provider or the phone.

Инструкция по настройке роутера Zyxel Keenetic Omni 2

Then set the IP settings. It is recommended that the automatic setting of the IP address. Next, you need to login to enter the username and the code assigned to the provider.

PPPoE for the House.ru, TTK, Rostelecom

Is selected in the bottom menu, the globe icon is and click «Connect», which is determined by the priority configuration. What «Description» is set to «Broadband connection». This opens the item «connect via Ethernet».

On this tab, set the jackdaws in the fields of:

  • «Use socket» WAN (blue);
  • «Enable»;
  • «Use for Internet».

In the list of «IP settings» should be set to «No IP address» and the value in the field «MAC address» is accepted as «default». Action is confirmed by pressing «Apply».

On the tab «PPPoE/VPN» click on «Add connection». This will navigate to the tab «connection setup» where it installs daws:

  • «Enable»;
  • «Use to exit ….».

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

Next field:

  • «Description»,
  • «Service name» are not filled , left empty;
  • data is entered «username» and «Password».

Selected from a list:

  • the Protocol type is «PPPoE»;
  • «Connect using» type «Broadband connection».

Modes default:

  • «Authentication method» — type «Auto»;
  • «… settings» — «Auto».

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

Confirm the selected modes by pressing «Apply» and verify the quality of his work.

L2TP for Beeline

In the bottom menu to click on the globe icon, choose the tab «Connection». In the «Description» field set to «Broadband connection». Navigate to «connection settings …».

Is controlled by the presence of ticks in the boxes:

  • «Use socket» connector WAN (blue) and the LAN port to communicate with another device (e.g., IPTV set-top box);
  • «Enable the interface»;
  • «Use to exit ….».
  1. From the list of «IP settings» select «auto». The rest of the line leave without changes, click on «Apply».
  2. A transition is made to the tab «PPPoE/VPN», where you click on «Add connection».

To put daws:

  • «Enable»;
  • «Use to exit ….»;
  • auto-tuning the TCP MSS.

Payroll setup:

  • type (Protocol) «L2TP»;

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • «Connect using» type «Broadband connection ISP»;
  • the authentication method to automatic.
  • «…. IP settings the» view «Automatically».

To register the data in the rows:

  • combination tp.internet.beeline.ru in the «server Address»;
  • number of personal account in «user Name»;
  • invented by the user, the word «Password».

Click «Apply». To check the efficiency of inclusion.

Video: Overview of setting up Internet

WiFi

Included on the tab «Wi-Fi» (bottom menu, icon bars), the section «access Point», where you specify its name, the channel, the level of protection, the link key.

In the fields of prescription:

  • the ssid – the name of Latin;
  • channel – auto;
  • protection – wpa2-psk;
  • the signal strength is 100 %;

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • the key – code word, known only to the owner.

IPTV

There are 2 ways configuration, which are directly determined by the type of traffic: neteherlands or legirovaniem. While in the subscription regulations, the need arises to remove a tag for IPTV VLAN or leave it.

In the first case the local port is simply a parallel providersone, and in the second case, the removal of the jackdaws on the WAN port causes the compatibility problem with the Internet. Consider their types.

Option 1. Keenetic Omni II model no c IPTV VLAN ID

Is logging in to the web interface of the router (see paragraph …). In the bottom menu, select the globe icon. In the Connections tab in the Description field click on a broadband connection the «Broadband connection».

In the opened window include an automatic mode, IP settings and check the Daw in Windows:

  • «Use socket» WAN (blue) and the LAN (yellow), which includes the console;
  • «Enable»;

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • «Use to exit ….».

If it is, then click «Apply».

The developers of the product offer further configure the IGMP Proxy.

To do this:

  1. on the tab «System» (the sign of the wheel in the bottom menu) select the menu «Components», where you enable the service on the checkbox next to;
  2. actions confirm by pressing «Apply»;
  3. next, a transition is made to the tab «Home network» (the icon of two monitors in the bottom menu), go to window «IGMP Proxy», which also enable the service on the Daw, and set the direction of the transfer:
  • «Broadband Connection (ISP)» corresponds «To ISP»;

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • «Home Network» corresponds to the «home network»;
  • click «Apply».

Option 2. Model Omni Keenetic II and IPTVс VLAN ID

In the bottom menu, select the globe icon to go to the IPoE tab and click on «Add interface». In the window that appears, enter a name for the new interface of the virtual grid, the so-called ID «Vlan ID», which should be in technical support and then enter free-field recording.

In the window «connect over Ethernet» (see Fig.) insert jackdaws in line:

  • «To pass the VLAN tag ID» — WAN (blue color);
  • «Enable» ;
  • and put them in «Use to exit ….»;

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • the value of the «IP settings» set «No IP address». Act on «Apply».

Reset the router

If we are dealing with second-hand device, it is best to bring it to the factory settings. To this end, cable outputs and inputs is a hidden reset button that is signed with the word «Reset».

To click, you must use the needle clockwise with a screwdriver or something similar. In the on state of the device after its self-test and download click on it and wait for the power led (Status) blinks frequently.

This treatment time lasts approximately 30 seconds.

Firmware update

With the installation of automatic IP addressing, firmware can be updated with a new login to the web interface of the router.

The update operation is best performed in wired mode.

Forced to upgrade it in this order:

  • choose the bottom menu «System» (the gear icon), «Configuration»;
  • click the line «firmware»;
  • to open the window «Control file»;

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • download and unzip the update file with the bin extension;

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • to select the location in the window «Manage files» and click «Replace»;

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • to wait until the end of the program.
  • make sure that the System window the system monitor changed program version.

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

Change the factory default password

  • in the address bar of the browser to type: 192.168.1.1.
  • in the System properties window choose «Users»
  • enter the new code twice.

    Инструкция по настройке роутера Zyxel Keenetic Omni 2

  • to save the changes.

Considered modes of functioning of a router of Zyxel Keenetic Omni 2 model. They allow you to configure the router on their own, without the involvement of specialists.




Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *