instructions for setting up the router and ADSL modem

By | 10.12.2018

Instructions for setting up the router and ADSL modem

Many providers are currently working on ADSL technology. Therefore, to implement a connection to equipment of this type requires a special device – an ADSL modem. The only disadvantage of such connection is that to connect to the modem is usually only one PC, using stranded cable ties.

A way out of this situation is to buy a Wi-Fi router that can work in conjunction with a modem of this type. There are also models of routers, which combine a router and ADSL modem.

When you select the router you need to know exactly what it supports joint work with the ADSL modem. The easiest way to configure collaboration this type of modem, and router D-Link DIR 320.

Инструкция по настройке роутера и модема ADSL

When you are configuring your ADSL modem in router mode, you must properly configure the modem itself. He also needs «to be able» to cooperate with Wi-Fi equipment.

Инструкция по настройке роутера и модема ADSL

One of the most simple to set up modems of this type – ZyXelP-660RT2 .

Video: Installing and configuring a Wi-Fi router

Preparation of the modem

To successfully configure bundles ADSL-modem – wifi-router it is necessary to properly provision the modem itself. The model needs to be set to bridge mode. In the settings, this mode is called «Bridge». This mode allows the modem to establish a connection with the provider – ISP – and then how would auto-delete themselves, just passing all traffic through itself. In fact, the device will act as the interface between the global network and the router. Setup as follows:

  • in the address bar of any browser on PC enter the combination of numbers is

    Инструкция по настройке роутера и модема ADSL


  • in the opened window you must enter the password 1234 (the default);
  • in the next window you must select the type of appearance settings page. You should install a tick opposite «gotoadvancedsetup»;

    Инструкция по настройке роутера и модема ADSL

  • next, you need to visit menu Network->WAN. When you click on the tab «InternetConnection» you can see a field called «Mode». You should establish there a mode «Bridge» (bridge);
  • definitely need to pay attention to the field «Encapsulation», put the modem in RFC 1483 mode;
  • in the field «VPI/VCI» and «Multiplex» values vary depending on the operator.

    Инструкция по настройке роутера и модема ADSL

After configuration the modem is configured on the PC. Since in bridge mode the modem establishes a connection only physically. For user authentication, you must create a separate connection on the computer to which it is connected.

Training PC

The modem setup is over, you need to connect it to a computer running any version of Windows operating system. Since the setup works in that environment as simple as possible. Physically when the ADSL modem is connected to the computer, perform the following steps:

  1. install modem drivers (if required);
  2. to create a PPPoE connection.

Create a connection of this type is as follows:

  1. go to «control Panel»-> «Manage network connections». In the window that opens, find the icon titled «set up a connection or network»;

    Инструкция по настройке роутера и модема ADSL

  2. after that, the operating system will be launched, «the wizard connect to the Internet». A window will open where you choose «anyway to create a new connection»;

    Инструкция по настройке роутера и модема ADSL

  3. the following window will open, in this operating system will offer two options: «no, create new connection» and «Yes, to choose an existing connection». You should put a tick on the first point;

    Инструкция по настройке роутера и модема ADSL

  4. a new window will appear with two choices: «Broadband connection PPPoE», «Dial-up». Stop at the second paragraph;

    Инструкция по настройке роутера и модема ADSL

  5. in the next window you must enter a username and password to connect. These data should be provided by the provider;

    Инструкция по настройке роутера и модема ADSL

  6. next, the operating system will alert you to the fact that the connection test failed. The choice will be three options: «retry», «install reason», «still make this connection». You should choose the latter, then you can safely close the setup wizard connections.

When the setting has already been done, you can connect a Wi-Fi router and start working.

Connecting ADSL-router computer to the network

There are routers that can work with an ADSL connection directly, without intermediaries in the form of a special modem. Of course, the price of such a device is much higher than a normal router. For example, Zyxel Keenetic DSL will cost the user at 2400 RUB.

The connection requires some data that must be provided by the ISP:

  • IP address if it is static;
  • username and password for connection to the line;
  • the encapsulation type (LLC or VC);
  • data for VPI.

Connecting the computer and router Keenetic DSL to the network can be performed in automatic mode, using special programs, and manual mode. If the automatic configuration is possible, the setting in manual mode as follows:

  • you need to connect to the WEB Configurator. In the window you should find the menu Internet->ADSL click ADSL;

    Инструкция по настройке роутера и модема ADSL

  • after having executed the previous step will open a window where you can enter all the connection data manually.

    Инструкция по настройке роутера и модема ADSL

    It must be done in accordance with the requirements of the provider. When all required parameters are entered, you can press the button «Save»;

  • in section «Internet», you must configure the section «PPPoE/VPN». Click «Add connection». Then place a tick in points «Include», «Use for Internet access». Under «Type» select «PPPoE». «Connect using»-> «ADSL connection»;

    Инструкция по настройке роутера и модема ADSL

  • enter the user name and password. If the IP address provider assigns the static IP you must specify it in the «configure IP settings», otherwise choose the automatic mode.

At this stage, to configure ADSL router fails.

How to configure the router via the ADSL modem

When you need to configure the router via the ADSL modem, implements a scheme of the following form:

  1. configuring the modem is only connecting to the Internet and the mode is «Bridge». Then actions are performed to make the network accessible via a Wi-Fi interface (for the router P-330W):
    • use the WEB Configurator to set the mode «Gateway». In paragraph called «WAN AccessType» set to PPPoE;

      Инструкция по настройке роутера и модема ADSL

  2. after executing the first paragraph simply enough to specify a user name and password provided by the ISP to connect to the Internet.

    Инструкция по настройке роутера и модема ADSL

Modes ADS — modem

ADSL modems can work only in two modes:

  1. router mode;
  2. the bridge mode.

Configuring ADSL modem in router mode is to change the mode via the WEB interface. This mode turns the communication device into an independent small server. His work includes storing data about the authorization, various parameters required for the connection.

Also in this mode, the modem maintains the connection, and when connection is broken without help reconnects. A feature of this mode is that the modem has a firewall function.

When the modem is switched to bridge mode, it represents just an intermediate device between the network and the network interface card of a personal computer. Connection parameters and authorized user data stored on the PC.

Video: setup of ADSL modem

Configuring Wi-Fi

Wi-Fi setup most routers is limited by setting a checkmark in the «Enabled» or «Disabled». You also need to call the network created by the router and choose a security mode (usually WPA2).

Инструкция по настройке роутера и модема ADSL

Setup ADSL modem and router, as well as equipment that combines functions of these devices is a fairly simple process. It is only important to carefully study the specifications of the machine and how to connect them.

Wi-Fi is today one of the most commonly used technologies for Internet access. But many operators are working with ADSL technology, and the cost of the Internet center (which combines the router and ADSL modem) is quite large. So the theme settings and using the bundles of ADSL modem->PC-> Wi-Fi router is extremely important.

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *