how to change the password on the router Zyxel Keenetic

By | 10.12.2018



How to change the password on the router Zyxel Keenetic

After buying router the first thing to worry about reliable protection. This will help prevent not only unauthorized access to your personal traffic, but the violation of rights of privacy. Replacement will not take much time but will provide good protection.

Why the password?

A combination of letters and numbers helps to restrict access to the router. The procedure required to preserve traffic and privacy. This is especially true for devices with built-in Wi-Fi.

If the user notices a decrease in speed — it could be a symptom of unauthorized connections to your network. The lights flash without the use of traffic evidence of unfair operation of the equipment by someone else.

Инструкция по смене пароля на роутере Zyxel Keenetic

Wi-Fi without proper encryption can be a direct channel of access to information on your computer. Experienced hacker can easily take advantage of this loophole, and stealing any data that he or finds out important secrets. To avoid this, you need to take certain protection measures.

Any logged user goes on the network under your IP address. When making any illegal action, claims law enforcement officers will be to the unit owner.

Reliable combination will save you from such problems.

Input into the settings

To enter the settings use the web interface. This requires your browser to register: 192.168.1.1. Factory combination -1234, name is admin.

Инструкция по смене пароля на роутере Zyxel Keenetic

If the data entered nothing happens or you receive authorization error — you must turn the router and find on the rear panel Reset button. Press and hold for 10 seconds. After that, all settings are returned to their factory defaults.

Инструкция по смене пароля на роутере Zyxel Keenetic

After you log in, the screen will display system information about the device. To the right are tabs. With their help, controlled the operation of the router, and enter the desired settings.

Apart from the change password menu you can make additional steps:

  • to configure routing and wireless to get;
  • to set the authorization parameters;
  • to identify a subnet;
  • to change the connection settings.

    Инструкция по смене пароля на роутере Zyxel Keenetic

To exit settings, simply close the web page. After making changes you must click «Apply» and they will take effect.

How to change the password on the router Zyxel Keenetic?

In the web interface, you should find a tab «System» and enter a new combination in the appropriate box. Duplicate the same numbers in the box at the bottom. The data to be stored by pressing apply. The changes will allow you to personally use the Internet center.

Инструкция по смене пароля на роутере Zyxel Keenetic

What to do if forgot password?

It is easiest to use the button Resetи to restore to factory settings.

If the keys do not, or it does not work, there is another path consisting of these steps:

  1. connect the device to computer via COM port;
  2. turn on the terminal program (data bits — 8, speed — 9600 bps, stop bits — 1, integrity — the negative flow control negative);
  3. connect the apparatus;
  4. log in Debug mode (will be);
  5. type the command ATSH;
  6. download firmware for Zyxel Keenetic on the website;
  7. unzip the archive and locate the rom file enter ATLC to start recording.

If you use HyperTerminal transfer menu select Send file by Xmodem Protocol. Click «Browse» and locate the rom file and send it. ATGO command will reboot the device.

Video: Connecting and configuring the router ZyXel

Change the password on Wi-fi

To regulate access to the hotspot you need to select the «Security»tab.

In the tab when you change the cipher, you need to set the following parameters:

  • a authentication type: WPA-PSK/WPA2-PSK;
  • the network key format: ASCII;
  • security type: TKIP/AES.

Инструкция по смене пароля на роутере Zyxel Keenetic

Not to be mistaken with the set of numbers, better to put the check box marked «Show network key». The minimum length of code is 8 digits, the maximum 63.

Do not make a combination too complex. Remember, every time you log on you will need to type it out.

The manufacturer recommends using the device serial number as a combination. It is a reliable protection against unauthorized external connections. If you live outside, think of your own cipher and do not save it when you connect.

Change password in router Zyxel Keenetic does not take much time. The procedure itself is simple and straightforward. You can change the settings of access to the Internet center and Wi-Fi connection. In the web interface there are many other useful tabs that will help you with the management device.




Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *