configure WIFI router ASUS RT N11P

By | 10.12.2018



Configure WIFI router ASUS RT N11P

ASUS RT-N11P is a simple budget router starter level, designed for undemanding users. ASUS has a whole series of similar devices from which the router RT-N11P characterized by the presence of «stronger» antennas.

A number of models of routers from ASUS are currently very high. There are absolutely new models in the sale, there are still routers previous generations.

In the model the letter P in the name suggests a more powerful antenna with higher gain. This factor directly depends on the total area of wifi coverage. In General, the model RT-N11P is a classic ASUS router with a typical design, software and hardware.

After the selection and purchase of the router it is important to properly place and configure accordingly. The exceptions are cases when ISPs use a dynamic connection type. Most home Wi-Fi devices are initially configured in a similar type of connection. Despite this, you still need to change the options of Wi-Fi router for wireless settings.

Kit & appearance

The router comes in a compact cardboard box standard dark tones. It features full localization. The packaging contains useful information, such as photos, key features, detailed technical specifications and other helpful information.

Настройка WIFI роутера ASUS RT N11P

Package is standard for low-cost models and includes: router, switching power supply (12V/0.5 A), black patch cord, warranty card and quick setup guide. The warranty period router limited to three years.

Настройка WIFI роутера ASUS RT N11P

The size of the router be 14.6×11,1×3.4 cm, excluding antennae. Material the housings are made of black plastic. The corners of the lower part is equipped with legs made of rubber. Also has holes for mounting on the wall.

Настройка WIFI роутера ASUS RT N11P

The design of the obverse is similar to the «diamond facets» on the Left bottom there is a block of 4 led indicators. They practically do not irritate blinking, but its design is a little dull and rough.

Настройка WIFI роутера ASUS RT N11P

The side walls and the lower part is equipped with ventilation grilles. The temperature regime even at maximum load satisfactory.

From the back you can see two stationary antennas, five indicator-free network ports, the input connector of the power supply with the toggle switch and press the WPS/reset. There are all very tight, but for a class of budget models is quite traditional.

Настройка WIFI роутера ASUS RT N11P

The quality of the production router is quite decent. Moreover, ASUS keeps it at the top level as in top-end and budget models. The design is practical, and the design of the router is quite easy compared to other routers in this price range.

Connection

First router ASUS RT-N11P you want to connect to a workstation, mobile computer or other portable device.

The connection can be via LAN cable, which is included in the kit of the router and using WI-Fi. More reliable connection via cable, due to the fact that modern firmware secure, encrypted Wi-Fi that can cause certain problems.

Настройка WIFI роутера ASUS RT N11P

The sequence of steps to physically connect the router:

  • you need to connect the power supply into the socket «power»;
  • then a LAN cable from the ISP to connect to socket «WAN» on the router;
  • the power cord included with the router ASUS RT-N11P one side should be connected to the network card of a workstation or notebook, and opposite to any LAN port on the router.

The physical connection of the router can be considered completed. If a successful connection on the front panel of the router should light up four LEDs: WPS, WLAN, POWER, and one of the «LAN».

Video: Asus RT N11P

Entrance

The most common question that arises when configuring the router – «How to go to settings?». For this you need to login to its web interface.

Настройка WIFI роутера ASUS RT N11P

To log in to the web interface of the router should open a web-browser installed. After its launch in the address bar to type the ip address of the router. The new device has the address 192. 168.1.1. The default Login is «admin» , Password is «admin». Username and password are the data values, provided that the router has factory settings.

Configure Internet protocols

After a successful login to the router interface, select the tab on the left side «advanced settings» and in the list that appears, mark the «WAN». Further configuration depends on the selected connection Protocol.

PPTP

To configure the router for the PPTP Protocol should:

  • in the first line to install the «PPTP»;

    Настройка WIFI роутера ASUS RT N11P

  • in the «settings» in all 3-x points to note «YES»;
  • set the marker to «YES» («Obtain an IP address and connect to DNS automatically»);
  • fill «user Name»;
  • enter the password in the corresponding field;
  • in the «Server Heart-Beat or PPTP/L2TP(VPN)» enter the ip address or name of the vpn server. They also stated in the contract with the provider;
  • in the host name, you need to dial a random set of characters in the English keyboard layout;
  • selecting «Apply», it is recommended to remember your settings.

L2TP

To configure router ASUS RT N11P L2TP must:

  • in the first line to install»L2TP»;

    Настройка WIFI роутера ASUS RT N11P

  • in the «settings» in all 3-x points to note «YES»;
  • set the marker to «YES» («Obtain an IP address and connect to DNS automatically»);
  • fill in the field «user Name»;
  • enter the password in the corresponding field;
  • in the field «VPN Server» enter the ip address or name of the vpn server. Information contained in provider documentation. For Beeline the name of the vpn server tp.internet.beeline.ru.
  • in the host name, you need to dial arbitrary sequence of English characters;
  • selecting «Apply», it is recommended to remember your settings.

PPPoE

Basically all ISPs in Russia are working on a network Protocol PPPoE, including Rostelecom.

To configure router PPPoE should:

  • the first line of the install – «PPPoE»;

    Настройка WIFI роутера ASUS RT N11P

  • in the «settings» in all 3-x points to note «YES»;
  • set the marker to «YES»(«Obtain an IP address and connect to DNS automatically»);
  • fill in the field «user Name»;
  • enter the password in the corresponding field;
  • in the «MTU» to 1492 enter;
  • the switch in the «Enable VPN + DHCP Connection» set to «NO»;
  • selecting «Apply», it is recommended to remember your settings.

A static IP address

To configure the router with a static IP address should be:

  • in the first line to install the «PPTP»;

    Настройка WIFI роутера ASUS RT N11P

  • set the marker in position «NO» («Obtain an IP address and connect to DNS automatically»);
  • fill in the fields «IP address», «subnet Mask» and «default gateway»;
  • in the field «DNS server 1» and «DNS server 2» enter the values of the servers used by the provider;
  • fill in the fields «Username» and «Password»;
  • in the «Server Heart-Beat or PPTP/L2TP(VPN)» enter the ip address or name of the vpn server. They are listed in the contract with the provider;
  • selecting «Apply», it is recommended to remember your settings.

Configure ASUS RT N11P router in repeater mode

To configure the router to work in repeater mode should:

  1. log in to the web interface of the device;
  2. then select the tab «operation Mode» section of «Administration»;

    Настройка WIFI роутера ASUS RT N11P

  3. note the «repeater Mode» and to remember the configuration. Once the router goes to reboot.
  4. after restart, you must login again to the web interface of the router and choose the «Quick Internet setup»;
  5. a table appears Wi-Fi networks, you need to choose the one which you want to connect the repeater;
  6. then you must enter the password to the network in the «Network key» and select «Connect»;
  7. in the active window to set the checkbox «Use default settings» and click on the «Apply»button;
  8. in the case of a successful configuration message appears, then you can leave a web-based interface.

Wi-fi

Wi-Fi is configured as follows:

  • you want to enter «advanced settings — Wireless network»;
  • you need to choose the left tab and in the list that appears, mark the «Wireless network»;
  • then, you set the parameters:
  1. «SSID»: drive the name of the wireless network;

    Настройка WIFI роутера ASUS RT N11P

  2. «Authentication method»: «WPA2-Personal»;
  3. «WPA»: «TKIP» or «AES»;
  4. «WPA preshared key»: arbitrary digital set length from 8 to 63;
  • save settings by clicking «Apply».

IPTV

IPTV router is configured in the time settings connect to the Internet. Select the «choose IPTV STB port» and specify the port number of the router, which will fit the cable from the box.

The firmware of the router

If the user is not satisfied with the work router, or you need additional capabilities it is recommended to reflash the router.

Настройка WIFI роутера ASUS RT N11P

To do this:

  • download the firmware from the Internet (to find the desired firmware version is not difficult);
  • extract the. BIN firmware file from the archive;
  • in the menu «Administration – Update firmware» select the firmware file and click «Upload».

Fill the new firmware takes about 5 minutes.

Restore factory settings

Often after changing settings the router should remember them so that in case of any difficulties, they were restored. This should go in «Administration — advanced settings — Restore/Save/Upload settings»

Настройка WIFI роутера ASUS RT N11P

To memorize the current settings of the router you want to click on «Save». The configuration file will be saved in the desired location on the hard drive.

To restore settings from a configuration file, click «Choose file», select the desired configuration file and then click «Send».

It is important to know that selecting «Restore» will reset the settings and restore factory settings.

Overall, ASUS RT-N11P is a quite simple and budget option to create a home network consisting of a maximum of four wired devices and multiple wireless gadgets. Technical abilities of ASUS RT-N11P will satisfy the majority of potential users, if the user wants more, then it is reasonable to pay attention to more expensive models.




Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *